New Design White /Red/Green/Pink/Black PP Plastic Bottle Twist Off Pointed Mouth Cap
Product Description :
| Type | Cap | Place of Origin | Zhejiang, China(Mainland) |
| Brand Name | Xinda pelosi | Model Number | XDP |
| Sprayer Type | Fine MIst Sprayer | Material | Plastic, PP |
| Plastic Type | PP | Usage | Packaging |
| Color | As per custom's requirement | Discharge rate | 0.5ml/t |
| QTY | 500 PCS | Measure | 57*33*39cm |
| Specification | 28/400 28/410 28/415 | Using range | Cleaning, Car wash, Personal care |
| Weight | 17g | packing | As per customer's requirement |
About bottle caps :
1. The height of the outer support bottle ring is relative to the height of the support bottle seat
A. The height of the outer support bottle ring is adjusted relative to the height of the support bottle seat
The height of the outer ring before the cover should be low and the stop spinning knife 0.5-1.0mm. To make sure the stop knife cuts into the bottle
After, the bottle body will not skew and ensure a certain amount of cut.
B. After the cap is completed, the outer ring height should be slightly higher than the stop spinning knife to lift the bottle body and make it free
Stop spinning knife.
2, capping pressure
A, screw cap pressure adjustment
* By adjusting the compression of the top pressure spring, adjust
The top pressure of the entire cap.
* Top pressure to ensure that the stop knife cut into the bottle body, produce
A certain amount of friction, to prevent the bottle body to spin.
* The proper top pressure is: when the screw head travels to
At the lowest point, when the spring compression B is 4-6mm,
The top pressure is about 20kg~ 25kg.
3, screw cap torque adjustment
• Adjustment of cap torque
* By adjusting the distance between the magnetic seats (or the size of the relative area),
Control the static torque of the capping head.
* The static torque of the screw cap is generally set at 15-20kg. Normally, this
Cap torsion produces a final cap opening torque in the range of 13 to 22kg.
* Too high capping torque may cause the cap surface to protrude and the bottle body to rotate (a large number of cases)
Cutting), the product can not be opened after the cap.
FAQ :
Q1. How to get samples?
Free samples are available, but the freight cost to your address need to be undertaken by customer. If you need samples, please contact us by e-mail. We usually send samples by By Fedex, DHL, TNT,UPS.
Q2. When can we receive samples?
If samples are in stock, samples can be sent out within 2 working days.
If samples need to be produced as per customer's requirements, samples can be sent out within 7-20 days.
Then it usually take 3-7 days to reach customer by Express.
Q3. What’s the Moq?
For inventory products, small qty is available.
If no inventory , because of our automatic machine limitation, moq is 20000pcs.
Q4. What’s the lead time for mass production?
For inventory: 7 -10days.
For products need to be produced on production line: 15-30days
Q5. Do you supply custom service?
There is a professional design team in our company, we are glad to make drawings and 3D samples , actual samples for customer approval.
Q6. How do you control the quality?
Full automatic inspection machine + 100% Manual light inspection.
