In Stock Customized Color Nozzle Twist-on Top Nozzle Plastic Screw Sauce Bottle Cap
Product Description :
| item | In Stock Customized Color Nozzle Twist-on Top Nozzle Plastic Screw Sauce Bottle Cap |
| Material | Plastic |
| | PP |
| Type | Spout Cap |
| Usage | Bottles |
| Feature | Non Spill |
| Custom Order | Accept |
| Place of Origin | China |
| | GUANGDONG |
| Brand Name | NO |
| Model Number | XDP-62FB |
| Product name | SOUCE cap |
| Material | PP plastic |
| Color | Glossy white, clear, black or custom |
| Finish | ribbed |
| Neck finish | 20/410 24/410 28/410 |
| Usage | plastic bottles matching |
To dispense the product, you turn the top ribbed nozzle counterclockwise, exposing the top orifice. When exposed you can neatly press the bottle to apply pressure to the contents inside for neat distribution. Once finished, turn the top ribbed cap clockwise to seal the bottle and keep contents inside. This closure is used mainly for dispensing personal care products such as sauces, lotions, conditioners, shampoos, and any soft cream-like texture.
About bottle caps :
1. Adjustment of the planetary wheel of the grasping cover system
① Ensure that the grasping cover die head is consistent with the used cover type, and the grasping cover tightness is moderate.
A. The number of teeth is different, and the surface of the cap body is inserted.
B, cooperate too loose:
a may fall off before capping;
b In the process of capping, the die head and the cap body slip, resulting in the cap body damage torque is too low and high
Cover;
C, too tight:
a cover body deforms when pressing into the cover grasping die head, making it difficult to seal the cover and forming a high cover;
b When the pressure is too large, the friction of the cover plate causes the bridge point to break;
c When the bottle is removed, it is difficult to push the bottle with the rod, and the bottle phenomenon may occur.
② Adjust the alignment between the center of the rotating cap and the center of the star wheel.
③ The lowest point of the capping head in the process of grasping the cover should be adapted to the height of the cover used.
2. Grab the height between the cover and the cover plate
Improper height between the lid and the flap plate:
a Lack of clearance before the cover: can not grab the cover, grab the cover before the die head will fly away.
b Cap tray is too low: the cap body is not sufficiently pressed, and it falls off before capping (or falls off on impact with the bottle mouth).
c The cover plate is too high: After the cover body is pressed into, the pressure is too large, which is easy to cause the bridge point to break and prevent
Stolen circle damage.
3, the screw cap and the center of the cover body are not right
A. The lid cannot be grasped.
B. Cover body damage, bridge point fracture.
C. Crooked cover, high cover.
D. Can even cause screw deformation.
Guide ring
Outer support bottle ring
Bottle stand
Back spinning knife
Star gear
Adjusting screw
Center misalignment
* By adjusting the bottle holder and the bottle holder star
Wheel center position.
4, screw the cap head and support bottle seat travel to the lowest point
A. The adjustment of the relative position of the screw cap and the bottle holder should ensure that the compression amount B at this time is 4-
Between 6mm. This compression stroke is used to complete the required stroke of the screw cap.
B, insufficient stroke can lead to insufficient torque, open the torque after the cap and the static torque of the cap
The gap is too large and other problems.
FAQ :
1, What is the material being used for your products?
They are all made of PP and PE.
2, How is the goods being packed?.
As per customer's request.
3.What is the minimum quantity I can order?
20,000 pcs(by sea) , less than 20000pcs (by express)
4.What happen in case any quality problem is identified after arrival?
We take full responsibility for any manufacturing defect, would either refund or reship good products to you.
5.What is the payment terms I can get?
T/T
6.How is your factory's productivity?
We can suply 500,000 pcs for each week.
